Name: Oceans Of Energy Floating Solar-Foner Solar - Foner Solar Power
Brand: Foner Solar
SKU: 264557303

Marine solar photovoltaic power stations are a worldwide challenge. This is because the wind and waves in the ocean are very strong and the working conditions are extremely harsh. Therefore, the entire photovoltaic matrix will be subjected to the impact of waves and corrosion by salt fog in the ocean. Especially when there are typhoons, how to ensure the safety of the photovoltaic power station on the sea surface is very important. Only when the waves are lower than 1 meter is it recommended to adopt a floating support system. Currently, most of them use pile foundations, but the cost is too high and the economic benefits are not good.Our floating solar supports on water surface are made of high-density polyethylene material, which possess the properties of corrosion resistance, UV resistance and aging resistance.

Main Equipment Schematic of the system

Item no.	Part name	picture	Item no.	Part name	picture
1	Main floater		7	Rear supporting leg
2	Equipment floater		8	clamp
3	Walkway floater		9	Fixing plate
4	Connecting floater		10	North-south anchor truss
5	Small walkway floater		11	East west anchor truss
6	Front supporting leg		12	Special bolt and nut

System Advantages

Long life cycle: Conduct comprehensive analysis and test on the composition and mechanical properties of HDPE raw materials and modified materials, optimize the ratio, and ensure that the service life of the solar system is not less than 25 years.

Enhanced accessories:The accessories such as brackets, pressure blocks, bolts and nuts are made of the same material as the floating system, such as HDPE, high-strength corrosion-resistant aluminum alloy or 304 stainless steel, which can meet the 25-year service life requirement of the photovoltaic system.

,Strong technical support: The experienced technical team can formulate the optimal floating system system design scheme according to the hydrological conditions of the project, and also put forward performance and cost optimization suggestions for the entire FPV power station system;

Modular design: modular structure design and anti-dork installation design, no need for large installation tools, improve the ease of installation;

Detection of floating solar System

Our floating solar system has obtained professional certifications such as TUV, CPVT, REACH, etc., and has also been verified through wind tunnel tests. The highest wind resistance level tested is over 50m/s, providing a strong guarantee for the smooth and safe operation of the photovoltaic system for 25 years.

Typical data of HDPE(high density polyethylene)

PROPERTIES	Unit	Value	Test Method
Melt Flow Rate
@190°C85kg load		0.45
@190°C&21.6kg load		9.5
Density @ 23°C	Kg/m	954	IS0 1183
MECHANICAL PROPERTIES
Tensile Modulus	MPA	1250	1S0 527-1,-2
Tensile Stress @ Yield	MPA	27	1S0 527-1,-2
Tensile Strain @ Yield	%	10	1S0 527-1,-2
Tensile lmpact Strength @-30°C (Notched)	Kg/m	92	IS0 8256
Hardness (Shore D)	-	60	IS0 868
FNCT(3.5 MPa,2 % lqepal BC/9,80°C)	Hrs	40	IS0 16770

Why choose floating solar power system?

Construction efficiency :Floating solar project construction is more convenient.

Operation & Maintenance:Easier solar module cleaning and project maintenance.

Site requirement:Water depth≥3m, wind speed≤200km/h.

Strategic Partners with Foner Solar

120 customers from more than 10 countries in the past 3 years.

Hot Tags: oceans of energy floating solar,floating solar manufacturers factory,floating solar system,floaitng solar penels, Rigid Floating Solar Panel Mounting System, Floating Solar Power Project, World Largest Floating Solar Farm, Floating Photovoltaic Plant, floating solar pontoon, Flexible Floating Solar Panel Mounting System