Product Overview
Solar panel brackets for flat roof are our new developed solar module mounting system.We focus on helping our customers reduce the investment cost of photovoltaic power stations and increase their power generation capacity. At the same time, we do our best to ensure that the construction process does not interfere with the normal operation of the client's business activities, and it is pollution-free and noise-free.We hope our solar panel brackets for flat roof can be your best choice.
System Components and Materials
A.Floating body
Our floating body is made of high density polyethylene.High-density polyethylene material features high corrosion resistance, strong wind resistance heavy snow load and UV aging resistance.
B.Brackets
The material of our brackets is the same raw material HDPE as floaters. This material has excellent corrosion resistance and can prevent rust for up to 25 years.
C.Bolts,nuts,and washers
Our nuts, bolts and washers are made of 316 stainless steel.
D.The connection method of the floats is plug-in type.
E.Supported solar modules' types
The size of our floats meets the requirements of all the solar modules.
|
Solar panel |
power |
size |
|
Solar panel |
500w-600w |
2278mm*1134mm*35mm/30mm |
|
Solar panel |
600W-720w |
2382mm*1303mm*35mm/30mm |
|
Solar panel |
2465mm*1303mm*35mm/33mm |
Components of solar panel brackets for flat roof
|
Item NO. |
Part name |
picture |
|
1 |
left support |
|
|
2 |
right support |
|
|
3 |
Bolts and nuts |
|
|
4 |
Rear clamp |
|
|
5 |
Front clamp |
|
|
6 |
Special HDPE nut |
|
Application scenarios
Solar panel brackets for flat roof can be used in these areas as following:
A.Flat rooftop
B.Flat ground
Key features and advantages
A.High structural strength
B. HDPE cavity filled with water could be used for withstanding up to 50m/s wind and 1.5kn/㎡snow load, verified through wind tunnel testing.
B.High installation efficiency
Modular design with pre-assembled sections reduces installation time by 30% compared to conventional concrete cement foundation.
C.Low transportation cost
Compact design allows stacking up to 30% more units per container, reducing logistics cost.
C.Strong corrosion resistance
All exposed parts use hot-dip galvanized material (>65μm coating) tested for 1,000 hours.
D.High layout flexibility
You can freely move them anywhere anytime, suitable for various panel sizes and site shapes.
Installation,operation and maintenance
A.Modular design, on-site installation
Because it is a modular design, there is no need for large-scale construction machinery. Just assemble the floats and solar modules on the site.
B.The number of installation workers and work efficiency
Under normal circumstances, a team of 15 people can install 250KW per day.
C.Convenience of operation and maintenance
When solar modules are damaged or need to be cleaned, our structure is very suitable for maintenance personnel to operate conveniently.
D.During the construction process, the waterproof layer of the roof will not be damaged.
specification Summary Table
|
Item |
parameters |
|
Supported solar modules |
182/210 mono crystalline silicon module, suitable for power range 500W-720W |
|
System design life |
≥25years |
|
Raw materials of floats |
HDPE(high density polyethylene) |
|
Brackets materials |
HDPE(high density polyethylene) |
|
Wind resistance grade |
50m/s |
|
Snow load |
1.5KN/㎡ |
|
Installation tilt angle |
0⁰-15⁰ customized available |
|
Maximum counterweight of HDPE cavity |
120kg |
|
Water injection time |
5minutes/per HDPE cavity |
Production capacity
A.The annual production capacity of our factory reaches 200MW.
B.Our products are processed by blow molding.
C.The core element of our product is the formula of the proportion of masterbatch and modified material.
Certification and quality control
 |
 |
To ensure the quality of our floating solar mounting system solution,we have passed test such as TUV and wind tunnel experiments.
A.We have obtained ISO9001 quality certification and TUV Rheinland certification from Germany.
B.We have wind tunnel test reports and load test reports.
Export experience and customer cases
Our products are sold around the world, including Thailand in Southeast Asia and Kenya in Africa.
Hot Tags: solar panel brackets for flat roof,Floating PV supplier,floating PV pontoon,Lake-based solar power, flat roof solar panel installation, flat roof solar brackets, Solar Panel Mounting Systems for Flat Roofs, Solar Panel Brackets for Flat Roof, Ballast Solar Panel Mounting with Water Filling, solar for flat roof