Product Overview
Flat roof solar panel mounting kit is used for supporting the solar panels. Our solar support structure is unique in design, stronger in structure, easy to install, simple to learn and has a lower cost.Welcome to purchase our products. We will do our best to provide you with the highest quality service.
System Components and Materials
A.Special plastic cavity foundation
Our special plastic cavity foundation is made of high density polyethylene.High-density polyethylene material has high corrosion resistance, strong wind resistance,heavy snow load and UV aging resistance.
B.Brackets
The material of our brackets is the same raw material HDPE.This material has excellent corrosion resistance and can prevent rust for up to 25 years.
C.Bolts,nuts,and washers
Our nuts, bolts and washers are made of 316 stainless steel.
D.The connection method of the floats is plug-in type.
E.Supported solar modules' types
The size of our floats meets the requirements of all the solar modules.
|
Solar panel |
power |
size |
|
Solar panel |
500w-600w |
2278mm*1134mm*35mm/30mm |
|
Solar panel |
600W-720w |
2382mm*1303mm*35mm/30mm |
|
Solar panel |
2465mm*1303mm*35mm/33mm |
Components of flat roof solar panel mounting kit
|
Item NO. |
Part name |
picture |
|
1 |
left support |
|
|
2 |
right support |
|
|
3 |
Bolts and nuts |
|
|
4 |
Rear clamp |
|
|
5 |
Front clamp |
|
|
6 |
Special HDPE nut |
|
Application scenarios
Flat roof solar panel mounting kit can be used in these areas as following:
A.Flat concrete cement rooftop
B.Flat ground
Key features and advantages
A.safety: the pressure of the counterweight foundation is uniform,and there is no need to use expansion screws, do not damage the roof structure and waterproof layer.
B.the layout is flexible, easy to adjust: according to the roof shape to adjust the photovoltaic module arrangement and placement, the layout is more flexible and convenient.
C.the reuse rate is very high: if the solar array needs to be migrated for various reasons, only need to disassemble the solar array and discharge the water, and the disassembled materials can be quickly assembled in the new project.
Installation,operation and maintenance
A.Site preparation: Clean the ground and ensure that the installation area is flat.
B.Cavity placement: Position the HDPE cavity at the designated location.
C.Installation of the support: Connect the support to the cavity.
D.Water injection injection: Inject water into the cavity to enhance stability.
E.Check fixation: Ensure that the support and the cavity are firmly connected and the overall structure is stable.
specification Summary Table
|
Item |
parameters |
|
Supported solar modules |
182/210 mono crystalline silicon module, suitable for power range 500W-720W |
|
System design life |
≥25years |
|
Raw materials of floats |
HDPE(high density polyethylene) |
|
Brackets materials |
HDPE(high density polyethylene) |
|
Wind resistance grade |
50m/s |
|
Snow load |
1.5KN/㎡ |
|
Installation tilt angle |
0⁰-15⁰ customized available |
|
Maximum counterweight of HDPE cavity |
120kg |
|
Water injection time |
5minutes/per HDPE cavity |
Production capacity
A.Production capacity of our factory per year reaches 200MW.
B.Our products are manufactured by blow molding.
C.The core element of our product is the formula of the proportion of masterbatch and modified material.
Certification and quality control
 |
 |
To ensure the quality of our floating solar mounting system solution,we have passed test such as TUV and wind tunnel experiments.
A.We have obtained ISO9001 quality certification and TUV Rheinland certification from Germany.
B.We have wind tunnel test reports and load test reports.
Export experience and customer cases
Our products are sold around the world, including Thailand in Southeast Asia and Kenya in Africa.
Hot Tags: flat roof solar panel mounting kit,Water-based solar,Floating PV supplier,floating PV pontoon, Ballasted Flat Roof Solar Mounting System, Solar Panel Brackets for Flat Roof, Solar Panel Ballast Mounting System, Solar Flat Roof Mounts Frames, flat roof solar panel mounting, flat roof solar brackets