Solar panel assembly racking is consisted of HDPE cavity,front supporting legs,rear supporting legs,special HDPE bolts and nuts,clamps.It is called Sunflowers series solar panels mounting system.It can applied to concrete cement flat roof and even ground.Adopting this mounting system is more reliable and convenient,saving more labor charge and assembly tools are very simple.HDPE materials are high density polyethylene.It is food grade material which is full friendly to manhood,and has harmony to environment.It saves labor costs and does not cause damage to the land. The construction is convenient and does not require large-scale machinery.
Product Specification
|
Raw material |
Made of modified anti-aging HDPE material in line with Hunt water absorption test |
|
Wall thickness |
2 ~4mm(adjustable) |
|
Dimension(mm) |
Models:1180x1260x140mm Model E:1100X950 X130mm |
|
Counterweight(water filled ) |
Model s: 160kg min Model E: 120kg min |
Main Equipment Schematic of the system
|
Item no. |
Part name |
picture |
Item no. |
Part name |
picture |
|
1 |
left support |
|
4 |
Rear clamp |
|
|
2 |
right support |
|
5 |
Front clamp |
|
|
3 |
Bolts and nuts |
|
6 |
Special HDPE nut |
|
Product Specification
|
Raw material |
Made of modified anti-aging HDPE material in line with Hunt water absorption test |
|
Wall thickness |
2 ~4mm(adjustable) |
|
Dimension(mm) |
Models:1180x1260x140mm Model E:1100X950 X130mm |
|
Counterweight(water filled ) |
Model s: 160kg min Model E: 120kg min |
Working principle
- The HDPE cavity is in an empty state during installation, and it is relatively light in weight, which makes it convenient for transportation and installation.
- After the installation is completed, water or sand should be injected into the cavity to increase the overall weight, enabling it to resist wind loads and other external forces.
- When it is necessary to relocate or dismantle, water or sand can be drained out to restore the cavity to its lightweight state, facilitating transportation and reuse
Design considerations
- Wind load and snow load: Design the size of the cavity and the amount of water injection based on the local climatic conditions.
- Terrain conditions: Ensure that the contact surface between the cavity and the ground is stable. If necessary, additional fixation devices can be added.
- Material strength: Select high-quality HDPE materials to ensure the durability and compressive resistance of the cavity.
- Drainage design: In low-lying areas, drainage issues need to be considered to prevent water accumulation inside the cavity.
Strategic Partners with Foner Solar
120 customers from more than 10 countries in the past 3 years.
Hot Tags: mounting solar panels on flat roof,floating solar system,floating PV pontoon,Floating PV supplier, small solar panels for roof, solar panels on east west roof, flat roof solar mounting system, solar panels on east west facing roof, in roof solar panels cost, flat solar panels roof