Flat Roof Mounting System
video
Flat Roof Mounting System

Flat Roof Mounting System

Solar panel mounting brackets for flat roof is made from high density polyethylene.The water filled mounting module is made of modified high quality HDPE material, which is same to the mounting modules used for floating solar system with same 25 years’ design service life with stable operation .

Product Overview

 

Our flat roof mounting system is made from high density polyethylene(i.e. HDPE).This is a new type of solar panel mounting technique and a new solar panel support material. Compared to traditional concrete cement foundation ,HDPE foundation filled with water is with excellent performance, high wear resistance and portable structure design, easy to be transported and carried,easy to assemble, hoisting, and be installed.We hope to be your long-term supplier.

product-800-451

 

System Components and Materials

 

A.HDPE cavity foundation
HDPE cavity foundation is made of high density polyethylene.High-density polyethylene material features high corrosion resistance, strong wind resistance heavy snow load and UV aging resistance.
B.Brackets
The material of our brackets is the same raw material HDPE.This material has excellent corrosion resistance and can prevent rust for up to 25 years.
C.Bolts,nuts,and washers
Our nuts, bolts and washers are made of 316 stainless steel.
D.The connection method of the floats is plug-in type.
E.Supported solar modules' types
The size of our floats meets the requirements of all the solar modules.

Solar panel

power

size

Solar panel

500w-600w

2278mm*1134mm*35mm/30mm

Solar panel

600W-720w

2382mm*1303mm*35mm/30mm

Solar panel

2465mm*1303mm*35mm/33mm

 

Components of flat roof mounting system

Item NO.

Part name

picture

1

left support

product-279-453

2

right support

product-242-393

3

Bolts and nuts

product-510-347

4

Rear clamp

product-275-273

5

Front clamp

product-433-397

6

Special HDPE nut

product-340-355

 

Application scenarios

 

 

Flat roof mounting system can be used in these areas as following:
A.Flat rooftop
B.Flat ground

product-1267-713

 

Key features and advantages

 

A.safety: the pressure of the counterweight foundation is uniform,and there is no need to use expansion screws, do not damage the roof structure and waterproof layer.
B.the layout is flexible, easy to adjust: according to the roof shape to adjust the photovoltaic module arrangement and placement, the layout is more flexible and convenient.
C.the reuse rate is very high: if the solar array needs to be migrated for various reasons, only need to disassemble the solar array and discharge the water, and the disassembled materials can be quickly assembled in the new project.

 

Installation,operation and maintenance

 

A.Modular design, on-site installation
Because it is a modular design, there is no need for large-scale construction machinery. Just assemble the HDPE foundation and solar modules on the site.
B.The number of installation workers and work efficiency
Under normal circumstances, a team of 15 people can install 250KW per day.
C.Convenience of operation and maintenance
When solar modules are damaged or need to be cleaned, our structure is very suitable for maintenance personnel to operate conveniently..

 

specification Summary Table

 

Item

parameters

Supported solar modules

182/210 mono crystalline silicon module, suitable for power range 500W-720W

System design life

≥25years

Raw materials of floats

HDPE(high density polyethylene)

Brackets materials

HDPE(high density polyethylene)

Wind resistance grade

50m/s

Snow load

1.5KN/㎡

Installation tilt angle

0⁰-15⁰ customized available

Maximum counterweight of HDPE cavity

120kg

Water injection time

5minutes/per HDPE cavity

 

Production capacity

 

 

A.The annual production capacity of our factory reaches 200MW.
B.Our products are processed by blow molding.
C.The core element of our product is the formula of the proportion of masterbatch and modified material.

product-470-225

 

Certification and quality control

 

product-182-256 product-187-251

 

To ensure the quality of our floating solar mounting system solution,we have passed test such as TUV and wind tunnel experiments.
A.We have obtained ISO9001 quality certification and TUV Rheinland certification from Germany.
B.We have wind tunnel test reports and load test reports.

 

Export experience and customer cases

 

Our products are sold around the world, including Thailand in Southeast Asia and Kenya in Africa.

product-865-648
Export to Kenya
product-469-352
Project under construction in Thailand

 

Hot Tags: flat roof mounting system,Floating PV supplier,PV pontoon,floating solar system, solar panels facing south east, solar panels leaking roof, east west roof solar panels, flexible solar panels for roof, solar panels on membrane roof, non roof mounted solar panels

Send Inquiry