Flat roof solar support structure is for mounting solar panels.Solar panel mounting brackets for flat roof is made from high density polyethylene.The water filled mounting module is made of modified high quality HDPE material, which is same to the mounting modules used for floating solar system with same 25 years' design service life with stable operation .The water filled HDPE mounting module is made of integrated blow molding process with excellent performance, high wear resistance and pressure resistance Portable structure design, easy to be transported and carried,easy to assemble, hoisting, and be installed Plane slotted design, increase the friction between the bottom and ground to improve the stability of mounting system .After the water filling, the unit pressure of the mounting module on the rooftop is much lower than that of the concrete counterweight, this can obviously reduce the potential damage to the rooftop The counterweight can be adjusted by changing the type and filling ratio of the medium filled into cavity of the module, thus the modules layout is more flexible.

Mobile HDPE mounting system
This mobile distributed PV HDPE mounting system is inspired by the floating solar system. It uses the HDPE mounting modules cavity as a water filled module. After the modules is filled with water, its own weight is used as the counterweight, and the "chained connection" conception is used for this HDPE mounting system layout design.After the water filling, the mounting modules are interconnected with each other to form an integrated modules array on rooftop. With the same function of the concrete counterweights, this integrated overall modules array have many advantages such as higher stability, convenient installation, low cost and easy storage and transportation.The anchoring concept is adopted to stabilize the array if needed, which will bring good system stability and wind resistance.

Product Specification
|
Raw material |
Made of modified anti-aging HDPE material in line with Hunt water absorption test |
|
Wall thickness |
2 ~4mm(adjustable) |
|
Dimension(mm) |
Models:1180x1260x140mm Model E:1100X950 X130mm |
|
Counterweight(water filled ) |
Model s: 160kg min Model E: 120kg min |

Strategic Partners with Foner Solar
120 customers from more than 10 countries in the past 3 years.






Hot Tags: solar panel racks for flat roofs,Floating PV supplier,Floating solar EPC,floating PV pontoon, solar water roof panels, flat roof ballast solar panel mounting, solar flat roof mounts, best in roof solar panels, solar panels for house roof, solar panels that look like metal roof




