Flat Roof Ballasted Solar Racking
video
Flat Roof Ballasted Solar Racking

Flat Roof Ballasted Solar Racking

Flat roof solar panel mounts are the essential part of the solar power plant.There are many kinds of solar panel mounting methods,such as concrete cement counterweight,metal supports.Our Sunflower series solar mounting system includes HDPE cavity,front supports,rear supports,clamps,bolts and nuts,pressing plates.

Product Overview

 

Flat roof ballasted solar racking is a type of counterweight foundation for photovoltaic supports. This counterweight support is a new form of support used for installing photovoltaic panels. It involves using HDPE chambers to inject water instead of using concrete weight bases. Its advantages include the ability to be moved to any location at any time without damaging the roof waterproof layer, easy installation and low cost. It can be applied on flat ground and flat rooftops.

product-461-260

 

System Components and Materials

 

A.floats
Raw materials of our floats is high density polyethylene.High-density polyethylene material features high corrosion resistance, strong weather resistance and UV aging resistance.
B.Brackets
The material of our brackets is the same raw material HDPE as floaters. This material has excellent corrosion resistance and can prevent rust for up to 25 years.
C.Bolts,nuts,and washers
Our nuts, bolts and washers are made of 304 stainless steel.
D.The connection method of the floats is plug-in type.
E.Supported solar modules' types
The size of our floats meets the requirements of all the solar modules.

Solar panel

power

size

Solar panel

500w-600w

2278mm*1134mm*35mm/30mm

Solar panel

600W-720w

2382mm*1303mm*35mm/30mm

Solar panel

2465mm*1303mm*35mm/33mm

 

Components of flat roof ballasted solar racking

 

Item NO.

Part name

picture

1

left support

product-279-453

2

right support

product-242-393

3

Bolts and nuts

product-510-347

4

Rear clamp

product-275-273

5

Front clamp

product-433-397

6

Special HDPE nut

product-340-355

 

Application scenarios

 

 

flat roof ballasted solar racking can be used in these areas as following:
A.Flat rooftop
B.Flat ground

product-1267-713

 

Key features and advantages

 

A.High structural strength
Uses water filled HDPE cavity to withstand up to 50m/s wind and 1.5kn/㎡snow load, verified through wind tunnel testing.
B.High installation efficiency
Modular design with pre-assembled sections reduces installation time by 30% compared to conventional concrete cement foundation.
C.Low transportation cost
Compact design allows stacking up to 30% more units per container, reducing logistics cost.
C.Strong corrosion resistance
All exposed parts use hot-dip galvanized material (>65μm coating) tested for 1,000 hours.
D.High layout flexibility
Can freely migrate, suitable for various panel sizes and site shapes.

 

Installation,operation and maintenance

 

A.Modular design, on-site installation
Because it is a modular design, there is no need for large-scale construction machinery. Just assemble the floats and solar modules on the site.
B.The number of installation workers and work efficiency
Under normal circumstances, a team of 15 people can install 250KW per day.
C.Convenience of operation and maintenance
When solar modules are damaged or need to be cleaned, our structure is very suitable for maintenance personnel to operate conveniently.

 

specification Summary Table

 

Item

parameters

Supported solar modules

182/210 mono crystalline silicon module, suitable for power range 500W-720W

System design life

≥25years

Raw materials of floats

HDPE(high density polyethylene)

Brackets materials

HDPE(high density polyethylene)

Wind resistance grade

50m/s

Snow load

1.5KN/㎡

Installation tilt angle

0⁰-15⁰ customized available

Maximum counterweight of HDPE cavity

120kg

Water injection time

5minutes/per HDPE cavity

 

Production capacity

 

 

A.The annual production capacity of our factory reaches 200MW.
B.Our products are processed by blow molding.
C.The core element of our product is the formula of the proportion of masterbatch and modified material.

product-470-225

 

Certification and quality control

 

product-182-256 product-187-251

 

To ensure the quality of our floating solar mounting system solution,we have passed test such as TUV and wind tunnel experiments.
A.We have obtained ISO9001 quality certification and TUV Rheinland certification from Germany.
B.We have wind tunnel test reports and load test reports.

 

Export experience and customer cases

 

Our products are sold around the world, including Thailand in Southeast Asia and Kenya in Africa.

product-865-648
Export to Kenya
product-469-352
Project under construction in Thailand

 

Hot Tags: flat roof ballasted solar racking,Floating PV supplier,floating solar system,floating soalr panels, best flat roof solar racking, solar panels facing south east, flat solar panels roof, solar panels on top of buildings, solar panels on flat roof, solar panels on truss roof

Send Inquiry