Floating solar power system is applied to fpv solar power project.The function of the floating solar system is to provide sufficient buoyancy to support the entire solar matrix floating on the water surface. Moreover, it should offer normal maintenance walkways to facilitate future maintenance by technicians. Besides, the entire floating system should also provide stable, reliable and adaptable anchoring solutions to cope with complex water level changes and extreme meteorological conditions. As the carrier of the power station, the floating solar system is an infrastructure and is therefore extremely important.
Product specification
|
Product name |
length |
width |
Product code |
picture |
|
Walkway floater |
2570mm |
450mm |
FN-FT-ZDFT-P-0202 |
|
|
Equipment floater |
1200mm |
605mm |
FN-FT-ZDFT-P-0202 |
|
|
Connecting floater |
840mm |
670mm |
FN-FT-SBFT-P-0202 |
|
Main Equipment Schematic of the system
|
Item no. |
Part name |
picture |
Item no. |
Part name |
picture |
|
1 |
Walkway floater |
|
7 |
Rear supporting leg |
|
|
2 |
Equipment floater |
|
8 |
Solar panel clamp |
|
|
3 |
Connecting floater |
|
9 |
Bolts and nuts |
|
|
4 |
Connecting rod |
|
10 |
North-south anchor truss |
|
|
5 |
Connecting piece |
|
11 |
East west anchor truss |
|
|
6 |
Front supporting leg |
|
System diagram
The floating solar system usually consists of walkway float, equipment float, connection float, support, pressure block, as well as anchor rope, anchor block and anchor pile. Our anchoring design will be made in accordance with the actual terrain of the project and the state of the water area, and will be designed in a practical way. Generally, the parts near the shore adopt anchor piles for anchoring, while other parts adopt sinking anchors. The anchor blocks are made of concrete blocks. The weight of each anchor block is usually 1 ton or 2 tons. Moreover, the setting of anchoring points needs to be designed according to the weight of the photovoltaic panel array.
Why choose floating solar power system?
Operation & Maintenance:Easier solar module cleaning and project maintenance.
Ecological influence:Floating solar project can help to reduce the evaporation of water.
Water surface usage:1MW floating solar projects will use 7500 square meters water surface
Compatibility Test Report of High-Density Polyethylene Floating Bodies with Drinking Water
Compatibility Test Report of High-Density Polyethylene Floating Bodies with Drinking Water
Research and development test
he full range of Foner Solar solar products have passed or carried out TUV, REACH and other relevant certifications, and have been verified by wind tunnel tests, and the wind resistance level can reach 60m/s (for example: Suzhou's historical maximum wind speed does not exceed 10-28m /s), comprehensively solving the wind resistance level and system safety anxiety that owners are most concerned about.
Strategic Partners with Foner Solar
120 customers from more than 10 countries in the past 3 years.
Hot Tags: floating solar power system,floating solar power system in thailand,Floating solar system,Floating photovoltaic, Pv Floating, Solar Panels Floating On Water, Solar Panels At Sea, World s Largest Floating Solar Plant, World Largest Floating Solar Farm, Solar Floating System