Floating solar photovoltaics means the whole solar plant would be built up on the water.It is consisted of solar modules,floating solar mounting frames,inverters,DC and AC cables etc.You should assembly floaters and solar panels in land first.Then push the solar array into the water.Equipment floater is used for setting up solar inverter.Sometimes invert can be put on the bank .And last you may connect small floating solar matrix together.
Main Equipment Schematic of the system
|
Item no. |
Part name |
picture |
Item no. |
Part name |
picture |
|
1 |
Main floater |
|
7 |
Rear supporting leg |
|
|
2 |
Equipment floater |
|
8 |
clamp |
|
|
3 |
Walkway floater |
|
9 |
Fixing plate |
|
|
4 |
Connecting floater |
|
10 |
North-south anchor truss |
|
|
5 |
Small walkway floater |
|
11 |
East west anchor truss |
|
|
6 |
Front supporting leg |
|
12 |
Special bolt and nut |
|
System Advantages
1.Strong technical support: The experienced technical team can formulate the optimal floating body system design scheme according to the hydrological conditions of the project, and also put forward performance and cost optimization suggestions for the entire FPV power station system;
2.Excellent environmental performance: on the basis of ensuring the function and buoyancy of the system, the surface shielding rate of the floating body system is < 40%, which enhances the ventilation and cooling effect, improves the power generation of the solar system and has less impact on the water quality.
3. Excellent product performance: Through flexible connection, increase the ultimate bearing capacity of the system. The functions of each part of the system are independent, and the redundant buoyancy of the main floating body provides more adequate buoyancy support for system operation and maintenance.
Floating solar cell installed on water
Anchoring system design
The principle of anchoring design is to determine the adopted anchoring form based on different geological conditions, underwater hydrological conditions, and changes in water level. Usually, the length of the anchor rope should be determined according to the situation of water level changes, and the material of the anchor rope should be determined according to the weight of the photovoltaic panel matrix. Generally, the weight of the concrete anchor block is between 1 and 2 tons. The anchor rope is usually made of stainless steel.
Strategic Partners with Foner Solar
120 customers from more than 10 countries in the past 3 years.
Hot Tags: floating solar photovoltaics,Floating Solar Photovoltaics in thailand,Floating Solar PV,floating solar system, Floating Solar Power Project, floating solar plant, Pv Floating System, Floating Solar Platform, Flexible Floating Solar Panel Mounting System, Largest Floating Solar Power Plant in The World