Floating Pv System On The Reservoir

When building floating pv system in the reservoirs, they are usually located near large hydropower dams. The water depth of reservoirs is generally above 10 meters. The requirements for floating bodies are generally above food grade. To prevent water pollution. And it should not have adverse effects on the surrounding ecological environment, maintaining ecological balance. Our floating body structure should not only meet the requirements of a 25-year service life, but also be in harmony with the natural environment and humans. At the same time, when the water level changes greatly, it is necessary to pay attention to that the entire photovoltaic matrix can naturally adjust, and the design requirements for the anchoring system are relatively high. Moreover, deep-water anchoring is the key difficulty of the entire floating system.

System diagram

 

The floating solar system usually consists of walkway float, equipment float, connection float, support, pressure block, as well as anchor rope, anchor block and anchor pile. Our anchoring design will be made in accordance with the actual terrain of the project and the state of the water area, and will be designed in a practical way. Generally, the parts near the shore adopt anchor piles for anchoring, while other parts adopt sinking anchors. The anchor blocks are made of concrete blocks. The weight of each anchor block is usually 1 ton or 2 tons. Moreover, the setting of anchoring points needs to be designed according to the weight of the photovoltaic panel array.

120 customers from more than 10 countries in the past 3 years.

Hot Tags: floating pv system,floating PV,floating solar,floating solar system, Largest Floating Solar Power Plant in The World, floating solar project, floating solar panel mounting frames, floating photovoltaic array, Largest Floating Solar Farm in The World, floating solar pv power plant